You Are Here: Homepage > FAQs > Removal Questions

Help us spread the word about Badge Magic. Email this site to a friend.

"I use badge magic to help make award streamers for pack flags. Cut the ribbon straight on the end and used Badge Magic to hold the ends folded over to make the triangular tip (and to hold the lanyard clip in place). Worked out great!"
-Scott W.

Removal Questions
Q: How can I remove the Badge Magic adhesive from my iron? Prev        Next
A: The easiest way to remove the adhesive from an iron bottom is to use a household solvent such as WD-40®, Goo Gone®, or the original version of Goof Off®, (not Goof Off 2.) Make sure the iron is cold – there’s no need to heat it! To avoid getting the solvent in the iron’s steam holes, spray the solvent onto cotton balls and use the cotton balls to scrub off the adhesive. For best results, wipe down the iron with rubbing alcohol and then run a batch of water through the steam holes to remove any residual solvents.

Home | Contact Us | Help | Link to Us | Our Policies
©2004-2013 Badge Magic. Boy Scouts of America®, the "Universal Emblem", Boy Scouts™, Boy Scout™, Cub Scouts®, Sea Scouts®, Venturing®, Webelos®, Awana®, Pioneer Clubs® and American Heritage Girls®, are either registered trademarks or trademarks in the United States and/or other countries. Used with permission. All rights reserved. The GIRL SCOUTS® name, mark, and all associated trademarks and logotypes, including the Trefoil Design, are owned by Girl Scouts of the USA
Images by Danita Delimont Stock Photography. All rights reserved.